Pcbs we do
Check below list to know what we can do for you
| Item |
Mass Production Capacity |
Pilot Run Production Capacity |
| Layer Counts |
1--16 |
18--24 |
| Material |
FR-4, High TG FR-4， |
PTFE |
| Aluminum Base,Rogers,etc |
Nelco, ect |
| Material Mixed Laminate |
4 layers -- 8 layers |
10 layers --14 layers |
| Maximum Size |
610mm X 1100mm |
|
| Board Outline Tolerance |
±0.13mm |
±0.10mm |
| Board Thickness |
0.40mm—4.0mm |
0.35mm—6.0mm |
|
|
|
| Thickness Tolerance |
±10% |
±8% |
| Insulation Layer Thickness |
0.10mm—4.00mm |
0.055mm--0.100mm |
| Minimum Line |
0.10mm |
0.075mm |
| Minimum Space |
0.10mm |
0.075mm |
| Out Layer Copper Thickness |
35um--175um |
35um--210um |
| Inner Layer Copper Thickness |
17um--175um |
17um--210um |
| Drilling Hole (Mechanical) |
0.25mm--6.35mm |
0.15mm--0.25mm |
| Finish Hole (Mechanical) |
0.20mm--6.30mm |
0.10mm--0.20mm |
| Diameter Tolerance (Mechanical) |
0.05mm |
|
| Registration (Mechanical) |
0.075mm |
0.050mm |
| Laser Hole |
0.10mm |
0.075mm |
| Aspect Ratio |
10:1 |
12:1;16:1 |
| Solder Mask Type |
LPI |
|
| SMT Mini. Solder Mask Width |
0.10mm |
0.075mm |
| Mini. Solder Mask Clearance |
0.05mm |
0.025mm |
| Plug Hole Diameter |
0.25mm--0.60mm |
0.70mm--1.00mm |
| Impedance Control Tolerance |
±10% |
±5% |
| Surface Finish |
HASL, Immersion Gold,OSP |
Immersion Tin |
| Plating Gold, etc |
|
Comment: Pilot Run Production means only medium order or small order for that kind production.
