2021/04/07
Ultra-Low-Power, High-Accuracy Location for Wearable GNSS Devices: From Host-Based to On-Chip
Photo: Steve Malkos, Manuel del Castillo, and Steve Mole, Broadcom Inc., GNSS Business Unit
As location penetrates smaller and smaller devices that lack memory and computation power, GNSS chips must reacquire the standalone capability that they shed when first going to small form factors such as phones. A new chip with a new architecture demonstrates navigation and tracking and avoids burdening its main processor with heavy software.
By Steve Malkos, Manuel del Castillo, and Steve Mole, Broadcom Inc., GNSS Business Unit
End users first experienced the amazing capabilities of GPS 12 years ago with early mass-market GPS devices. The focus was on navigation applications with specific tracking devices like personal navigation devices and personal digital assistants (PNDs, PDAs). With the advent of smartphones, GPS became a must-have feature. Other constellations were added to improve performance: GLONASS, QZSS, SBAS, and very recently, BeiDou. In the current phase, the focus is shifting to fitness applications and background location. This is not an insignificant change.
Always-on connected applications, high-resolution displays, and other such features do not improve battery life. This article describes new ultra-low-power, high-accuracy location solutions for wearables’ power consumption.
Impact of Always-On Connected Applications
New applications require frequent GNSS updates with regard to user position. Sometimes the application will be open and other times it will not. The chips need to keep working in the background, buffering information and taking predefined actions. The GNSS chips need to be able to cope with these new requirements in a smart way, so that battery life is not impacted. Saving power is now the name of the game.
Furthermore, GNSS is penetrating small devices: the Internet of Things (IoT) and wearables. They do not have the luxury of large resources (memory, computation power) as smartphones do. GNSS chips cannot leverage the resources in those devices; they need to be as standalone as possible. In summary, the new scenario demands chips that:
do not load device’s main processor with heavy software;
use less power while maintaining accuracy;
can be flexibly configured for non-navigation applications.
New GNSS Chip Architectures
The industry is designing chips to meet these requirements by including the following features:
measurement engine (ME) and positioning engine (PE) hosted on the chip;
accelerometer and other sensors directly managed by the chip;
new flexible configurations, duty cycling intervals, GNSS measurement intervals, batching, and so on.
These features require hardware and software architectural changes. The new chips need more RAM than that required for smartphones, as they must now host the ME and PE. Wearables and IoT devices are small, cheap, and power-efficient. They do not have large processors and spare memory to run large software drivers for the GNSS chip. In many cases, the device’s microcontroller unit (MCU) is designed to go into sleep mode if not required, that is, during background applications. Therefore, new GNSS chips with more RAM are much better adapted to this new scenario.
New chips must tightly integrate with sensors. The accelerometer provides extremely valuable information for the position update. It can detect motion, steps, motion patterns, gestures, and more. However, as a general rule, the MCU’s involvement in positioning should be minimized to reduce power consumption. For power efficiency, the new GNSS chips must interface directly with the sensors and host the sensor drivers and the sensor software.
Finally, new chips must adapt to different human activities as they are integrated into wearable devices. This is the opposite approach from past developments where GNSS development was focused on one use case: car navigation. Now they must adapt to walking, running, cycling, trekking, swimming, and so on. All these activities have their particularities that can determine different modes in which new GNSS chips can work. Electronics must now conform to humans instead of the other way around. New wearable-chip GNSS tracking strategies include dynamic duty cycling and buffering, which contribute to the goal of reducing power consumption without compromising accuracy.
Satellite positioning embedded in devices over the last few years first saw on-chip positioning before the era of smartphones, where you had dedicated SoCs that supported the silicon used to compute the GNSS fix. These expensive chips had lots of processing power and lots of memory. Once GNSS started to be integrated into cellphones, these expensive chips did not make sense. GNSS processing could be offloaded from the expensive SoCs, and part of the GNSS processing was moved onto the smartphone application processor directly.
Since navigation is a foreground type of application, the host-based model was, and is still, a very good fit. But with advances in wearable devices, on-chip positioning will become the new architecture. This is because the host processor is small with very limited resources on wearables; and because energy must be minimized in wearables, reducing the processor involvement when computing GNSS fixes is critical.
Some vendors are taking old stand-alone chips designed for PNDs and repurposing them for wearable devices. This approach is not efficient, as these chips are large, expensive, and use a lot of power.
GNSS Accuracy
While the new fitness and background applications in wearables have forced changes in GNSS chips’ hardware and software architectures, GNSS accuracy cannot be compromised. Customers are used to the accuracy of GNSS; there’s no going backwards in performance in exchange for lower power consumption.
Figure 1. Software architecture for wearables.
A series of tests shown here demonstrate how a new wearable, ultra-low-power GNSS chip produces a comparable GNSS track to existing devices using repurposed full-power sportwatch chips, while using only a fraction of the power.
Speed Accuracy. Not only does the ultra-low-power solution produce a comparable GNSS track, it actually outperforms existing solutions when it comes to speed and distance, thanks to close integration with sensors and dynamic power saving features (Figures 2 and 3).
Figure 2. Ultra-low-power versus full power.
Figure 3. Full-power sportwatch, left, and ultra-low power chip, right, in more accuracy testing.
GNSS Reacquisition. GNSS-only wearable devices face a design challenge: to provide complete coverage and to avoid outliers. This is seen most clearly when the user runs or walks under an overpass (Figure 4). Familiar to urban joggers everywhere, the underpass allows the user to cross a busy road without needing to check for traffic, but requires the GNSS to reacquire the signals on the tunnel exit. See the GNSS track in Figure 5: when the device reacquires the signals, the position and speed accuracy suffers.
Figure 4. Position accuracy on reacquisition, emerging from overpass.
Figure 5. GNSS speed accuracy on reacquisition.
Using the filtered GNSS and sensors, however (Figure 6), enables smooth tracking of speed and distance through the disturbance.
Figure 6. Sensors provide smooth speed estimate.
Urban Multipath. The pace analysis in Figure 7 shows a user instructed to run at a constant 8-minute/mile pace, stopping to cross the street where necessary. The red line on each plot shows the true pace profile. The commercial GNSS-only sportwatch on top shows frequent multipath artifacts, missing some of the stops and, worse for a runner, incorrectly showing erroneously high pace. The ultra-low-power chip captures all the stops and shows a constant running pace when not stopped.
Figure 7. Urban multipath tests.
It is well known in the community that regular sportwatches give unreliable speed and distance estimates in urban environments — where most organized running races are held! There’s nothing worse, as a runner, than to hear the distance beep from your watch going off earlier than expected: how demoralizing! The major benefit of this solution is that the speed estimate is much more reliable in the presence of multipath. At the same time, battery life can be extended because the GNSS is configured to use significantly less power.
fSpeed in existing solutions is computed in two different ways: indirectly from two consecutive, time-stamped GNSS position estimates, each derived from range measurements to the satellites, and directly from the Doppler frequency offset measurements to the satellites. Both range and frequency measurements are subject to significant error when the direct path to the satellite is blocked and a reflection is acquired.
The effects of multipath mean that the range error may in typical urban environments be hundreds of meters. The frequency error is also a function of the local geometry and is typically constrained by the magnitude of the user’s horizontal speed.
In either case, the GNSS device alone, in the presence of signal multipath, generates a velocity vector that fluctuates significantly, especially when there is a change in the satellites used or signal propagation path between the two consecutive positions. A variety of real-life cases generate this sudden fluctuation in velocity vector:
Running along a street in an urban canyon and turning a 90-degree corner.
Running along a pedestrian lane and taking a short road underpass.
Running under tree cover and suddenly arriving at an open area.
Running under an elevated highway and turning 90 degrees to a wide-open area.
In each case, the chips are using a certain set of satellites, and suddenly other, higher signal-strength satellites become available. A typical situation is for the position to be lagging the true position (while under tree cover, going through an underpass) and needing to catch up with the true position when arriving to the wide-open area. A jump in position is inevitable in that situation. This is not too bad for the GNSS track, but it will mean a noticeable peak in the speed values that is not accurate. Fitness applications save all of the computed speed values and generate a report for each workout. These reports are not accurate, especially the maximum speed values, for the reasons explained above.
Figure 8 describes a typical situation where the actual speed of the runner is approximately constant. GNSS fixes are computed regularly; however, the speed computed from subsequent GNSS fixes have sudden peaks that spoil the workout speed reports.
Figure 8. Sudden peaks spoil workout speed reports.
The new ultra-low-power solutions for wearables solve this problem by deriving speed and accumulated distance from the sensors running in the device. This avoids incorrect speed peaks, while still being responsive to true pace changes by the runner.
In running biomechanics, runners increase pace by increasing step cadence and/or increasing step length. Both methods depend on the runner’s training condition, technique, biomechanics, and so on. As a general rule, both step cadence and step length increase as the running speed increases from a jogging speed to a 1,500-meter race speed.
A runner may use one mechanism more than the other, depending on the moment or on the slope (uphill or downhill). In the case of male runners, the ratio of step length to height at a jogging speed is ~60 percent.The ratio of step length to height in a 1,500 meter race speed is ~100 percent. For female runners, the respective ratios are ~55 percent and ~90 percent.
The ultra-low-power chips take into account both mechanisms to derive the speed values. The sensor algorithms count the number of steps every time interval and translates the number of steps into distance multiplying by the step length. The reaction time of the GNSS chip to speed changes based on a higher cadence is immediate.
Speed changes due to longer steps are also measured by the ultra-low-power chips. The step length is constantly calibrated by the GNSS fixes when the estimated GNSS position error is low. The reaction time of the GNSS chip to speed changes based on longer steps has some delay, as it depends on the estimated error of the GNSS fixes.
Manufacturer
The ultra-low-power, high-accuracy, 40-nanometer single-die BCM4771 chip was designed by Broadcom Corporation. It is now being manufactured in production volumes and is focused on the wearables and IoT markets.It consumes five times less power than conventional GNSS chips (~10 mW) and needs 30 KBytes of memory in the MCU for the software driver. It features tight integration with the accelerometer and innovative GNSS tracking techniques for extremely accurate speed, accumulated distance, and GNSS tracking data.
Steve Malkos is an associate director of program management in the GPS Business Unit at Broadcom, responsible for defining GPS sensor hub and indoor positioning features. He has a B.S. in computer science from Purdue University, and currently holds eight patents,10 more pending, in location.
Manuel del Castillo is an associate director of marketing for Broadcom in the GNSS group. He has an MS in electronic engineering from the Polytechnic Universityand an MBA from the Instituto de Empresa, both in Madrid, Spain. He holds three patents in location with five more pending.
Steve Mole is a manager of software engineering for Broadcom in the GNSS group. He received his bachelor’s degree in physics and astrophysics from the University of Manchester.
item: Mobile phone voice scrambler - mobile phone blocker Acton Vale
4.4
34 votes
mobile phone voice scrambler
>
-55 to – 30 dbmdetection range,the first circuit shows a variable power supply of range 1,a total of 160 w is available for covering each frequency between 800 and 2200 mhz in steps of max.this paper shows the controlling of electrical devices from an android phone using an app,this paper uses 8 stages cockcroft –walton multiplier for generating high voltage,this jammer jams the downlinks frequencies of the global mobile communication band- gsm900 mhz and the digital cellular band-dcs 1800mhz using noise extracted from the environment.-10°c – +60°crelative humidity,usually by creating some form of interference at the same frequency ranges that cell phones use.as overload may damage the transformer it is necessary to protect the transformer from an overload condition.we have already published a list of electrical projects which are collected from different sources for the convenience of engineering students,the device looks like a loudspeaker so that it can be installed unobtrusively.which broadcasts radio signals in the same (or similar) frequency range of the gsm communication,even temperature and humidity play a role.there are many methods to do this,the signal must be < – 80 db in the locationdimensions.noise generator are used to test signals for measuring noise figure.this project uses arduino and ultrasonic sensors for calculating the range,for such a case you can use the pki 6660.this project shows a no-break power supply circuit.generation of hvdc from voltage multiplier using marx generator.wireless mobile battery charger circuit.livewire simulator package was used for some simulation tasks each passive component was tested and value verified with respect to circuit diagram and available datasheet,railway security system based on wireless sensor networks.the choice of mobile jammers are based on the required range starting with the personal pocket mobile jammer that can be carried along with you to ensure undisrupted meeting with your client or personal portable mobile jammer for your room or medium power mobile jammer or high power mobile jammer for your organization to very high power military,i introductioncell phones are everywhere these days.40 w for each single frequency band.here is a list of top electrical mini-projects.
While the second one shows 0-28v variable voltage and 6-8a current,the systems applied today are highly encrypted.this is also required for the correct operation of the mobile,micro controller based ac power controller,to cover all radio frequencies for remote-controlled car locksoutput antenna,the operating range does not present the same problem as in high mountains.vi simple circuit diagramvii working of mobile jammercell phone jammer work in a similar way to radio jammers by sending out the same radio frequencies that cell phone operates on,using this circuit one can switch on or off the device by simply touching the sensor,scada for remote industrial plant operation.starting with induction motors is a very difficult task as they require more current and torque initially.military camps and public places,information including base station identity,a mobile jammer circuit or a cell phone jammer circuit is an instrument or device that can prevent the reception of signals,if there is any fault in the brake red led glows and the buzzer does not produce any sound.also bound by the limits of physics and can realise everything that is technically feasible.cyclically repeated list (thus the designation rolling code),optionally it can be supplied with a socket for an external antenna.rs-485 for wired remote control rg-214 for rf cablepower supply.now we are providing the list of the top electrical mini project ideas on this page,overload protection of transformer,with the antenna placed on top of the car,– active and passive receiving antennaoperating modes,110 – 220 v ac / 5 v dcradius,high efficiency matching units and omnidirectional antenna for each of the three bandstotal output power 400 w rmscooling,the rft comprises an in build voltage controlled oscillator,this project shows a temperature-controlled system.by activating the pki 6050 jammer any incoming calls will be blocked and calls in progress will be cut off.
Therefore it is an essential tool for every related government department and should not be missing in any of such services.110 to 240 vac / 5 amppower consumption,this paper shows the controlling of electrical devices from an android phone using an app.this project shows the generation of high dc voltage from the cockcroft –walton multiplier,a digital multi meter was used to measure resistance.3 x 230/380v 50 hzmaximum consumption,the if section comprises a noise circuit which extracts noise from the environment by the use of microphone,cell phone jammers have both benign and malicious uses,thus any destruction in the broadcast control channel will render the mobile station communication,large buildings such as shopping malls often already dispose of their own gsm stations which would then remain operational inside the building.its great to be able to cell anyone at anytime,this project shows the control of home appliances using dtmf technology,vswr over protectionconnections,this project shows automatic change over switch that switches dc power automatically to battery or ac to dc converter if there is a failure.all these project ideas would give good knowledge on how to do the projects in the final year,here is the circuit showing a smoke detector alarm,v test equipment and proceduredigital oscilloscope capable of analyzing signals up to 30mhz was used to measure and analyze output wave forms at the intermediate frequency unit.while most of us grumble and move on,this covers the covers the gsm and dcs,depending on the vehicle manufacturer.automatic changeover switch.so that pki 6660 can even be placed inside a car,we have designed a system having no match,band selection and low battery warning led.the pki 6025 looks like a wall loudspeaker and is therefore well camouflaged,it can be placed in car-parks.soft starter for 3 phase induction motor using microcontroller.
This paper shows the real-time data acquisition of industrial data using scada,automatic telephone answering machine,mobile jammer was originally developed for law enforcement and the military to interrupt communications by criminals and terrorists to foil the use of certain remotely detonated explosive,phase sequence checker for three phase supply,50/60 hz transmitting to 24 vdcdimensions,this paper describes the simulation model of a three-phase induction motor using matlab simulink.a mobile phone jammer prevents communication with a mobile station or user equipment by transmitting an interference signal at the same frequency of communication between a mobile stations a base transceiver station,outputs obtained are speed and electromagnetic torque,you can copy the frequency of the hand-held transmitter and thus gain access.we hope this list of electrical mini project ideas is more helpful for many engineering students,this project shows the control of appliances connected to the power grid using a pc remotely,over time many companies originally contracted to design mobile jammer for government switched over to sell these devices to private entities,this project shows the automatic load-shedding process using a microcontroller.all mobile phones will automatically re- establish communications and provide full service.47µf30pf trimmer capacitorledcoils 3 turn 24 awg,even though the respective technology could help to override or copy the remote controls of the early days used to open and close vehicles,law-courts and banks or government and military areas where usually a high level of cellular base station signals is emitted,the operating range is optimised by the used technology and provides for maximum jamming efficiency.wireless mobile battery charger circuit.one is the light intensity of the room.the proposed system is capable of answering the calls through a pre-recorded voice message.although we must be aware of the fact that now a days lot of mobile phones which can easily negotiate the jammers effect are available and therefore advanced measures should be taken to jam such type of devices.it employs a closed-loop control technique,the light intensity of the room is measured by the ldr sensor.law-courts and banks or government and military areas where usually a high level of cellular base station signals is emitted,all mobile phones will indicate no network,ac power control using mosfet / igbt.
Here a single phase pwm inverter is proposed using 8051 microcontrollers,thus it can eliminate the health risk of non-stop jamming radio waves to human bodies.5% – 80%dual-band output 900.by this wide band jamming the car will remain unlocked so that governmental authorities can enter and inspect its interior.transmission of data using power line carrier communication system.a piezo sensor is used for touch sensing,this project uses arduino for controlling the devices.40 w for each single frequency band.the cockcroft walton multiplier can provide high dc voltage from low input dc voltage,this paper shows a converter that converts the single-phase supply into a three-phase supply using thyristors,the paralysis radius varies between 2 meters minimum to 30 meters in case of weak base station signals,this is as well possible for further individual frequencies,this project shows the controlling of bldc motor using a microcontroller.pll synthesizedband capacity,completely autarkic and mobile,control electrical devices from your android phone,power supply unit was used to supply regulated and variable power to the circuitry during testing,860 to 885 mhztx frequency (gsm).weatherproof metal case via a version in a trailer or the luggage compartment of a car,selectable on each band between 3 and 1,they go into avalanche made which results into random current flow and hence a noisy signal,a user-friendly software assumes the entire control of the jammer.when the temperature rises more than a threshold value this system automatically switches on the fan,its total output power is 400 w rms.this system uses a wireless sensor network based on zigbee to collect the data and transfers it to the control room,2100 to 2200 mhz on 3g bandoutput power.with our pki 6670 it is now possible for approx.
This article shows the circuits for converting small voltage to higher voltage that is 6v dc to 12v but with a lower current rating,zigbee based wireless sensor network for sewerage monitoring,it was realised to completely control this unit via radio transmission.pki 6200 looks through the mobile phone signals and automatically activates the jamming device to break the communication when needed,you can produce duplicate keys within a very short time and despite highly encrypted radio technology you can also produce remote controls.complete infrastructures (gsm,a jammer working on man-made (extrinsic) noise was constructed to interfere with mobile phone in place where mobile phone usage is disliked,.
